高压下聚苯胺的结构和电性能研究

 以金刚石压腔高压装置为工具，用Ⅱ型金刚石作压砧兼红外窗口，对本征态聚苯胺进行了高压（0~8.4 GPa）就位红外光谱测试。结果表明：在4.8~5.2 GPa压力区间，代表醌环振动的吸收峰相对代表苯环振动的吸收峰变小，表明聚苯胺在此压力区间结构上发生了显著变化，且这种变化是不可逆的。聚苯胺的高压（0~14.5 GPa）电阻测量结果表明：当压力小于7.5 GPa时，电阻随压力升高而显著降低，据此认为聚苯胺为电子性导电物质；在7.5 GPa处电阻出现极小值，然后又缓慢升高，至10 GPa后基本不变。推测聚苯胺电阻极小值是由结构变化引起的。至于红外光谱与电阻测量结果反映聚苯胺结构变化的压力值不一致，可能是由于测试条件不同所致。     

Application of synthetic reference materials in the medical radiological research centre

The contents of 21 chemical elements (Ag, Br, Ca, Cl, Co, Cr, Cs, Fe, Hg, K, Mg, Mn, Na, P, Rb, Sb, Sc, Se, Sr, Zn, Zr) in synthetic reference materials (SRMs) were compared with those in natural reference materials (NRMs) using short- and long-lived radionuclides. SRMs called synthetic standards (SSs) and synthetic standards, biological (SSBs) were prepared on the basis of phenol-formaldehyde resol resins in the Institute of Physics, Georgian Academy of Science. The NRMs included such IAEA reference materials as H-4 (animal muscle), A-13 (animal blood), H-5 (animal bone), SL-1 (lake sediment), SOIL-7 (soil), A-9 (mixed human diet), and IAEA-153 (milk powder). It was shown that SSB-SRMs possessed good representativity of the 30–50 mg tablets, high precision, operational convenience, and could be recommended for the INAA of a wide range of medico-biological and bioecological objects.     

Selective saturation and inversion of multiple resonances in high-resolution solid-state 13C experiments using slow spinning CP/MAS and tailored DANTE pulse sequences.

Taking advantage of the long 13C T1 values generally encountered in solids, selective saturation and inversion of more than one resonance in 13C CP/MAS experiments can be achieved by sequentially applying several DANTE pulse sequences centered at different transmitter frequency offsets. A new selective saturation pulse sequence is introduced composed of a series of 90 degrees DANTE sequences separated by interrupted decoupling periods during which the selected resonance is destroyed. Applications of this method, including the simplification of the measurement of the principal values of the 13C chemical shift tensor under slow MAS conditions, are described. The determination of the aromaticity of coal using a relatively slow MAS rate is also described.     

在粗糙表面上用液晶空间光调制器进行振动测量

为实现在一段时间内连续实时观测振动物体的全息干涉图形,采用覆盖铝箔的喇叭作为振动物体,利用铝箔原有未经特殊处理表面反射的漫反射光成像,并用光寻址液晶空间光调制器(Liquid crystal-sparial lightmodulator,LC-SLM)作为全息记录载体,来实现振动测量。实验中采用时间平均干涉测量法,得到了不同振动频率下物体的干涉图形。同时在连续改变振动物体的振动频率时,可以清晰地观察到物体振动全息干涉图形的变化过程,即近实时的全息干涉图形。     

Paper-like Microfibrous Nickel Catalyst for Hydrogen Production via NH3 Decomposition in Fuel Cell Applications

Recently, miniature H2 generator to power fuel cells for portable/micro electronic devices and passenger propulsion has been the focus of intense research activities1-3. One of the strategies is to find simple CO-free H2 production with novel microreactor…     

MORPHOLOGY OF BLACK CARBON AEROSOLS AND UBIQUITY OF 50-NANOMETER BLACK CARBON AEROSOLS IN THE ATMOSPHERE

Different-sized aerosols were collected by an Andersen air sampler to observe the detailed morphology of the black carbon （BC） aerosols which were separated chemically from the other accompanying aerosols, using a Scanning Electron Microscope equipped with an Energy Dispersive X-ray Spectrometer （SEM-EDX）. The results indicate that most BC aerosols are spherical particles of about 50 nm in diameter and with a homogeneous surface. Results also show that these particles aggregate with other aerosols or with themselves to form larger agglomerates in the micrometer range. The shape of these 50-nm BC spherical particles was found to be very similar to that of BC particles released from petroleum-powered vehicular internal combustion engines. These spherical BC particles were shown to be different from the previously reported fullerenes found using Matrix-Assisted Laser Desorption/Ionization Time-Of-Flight Mass Spectrometry （MALDI-TOF-MS）.     

通过平均场处理的严格重正化群变换方法对Potts模型的应用

本文运用作者所发展的严格docimation- 平均场近似方法对Potts 模型的临界指数作了计算.所得结果与严格解符合得很好, 而与计算工作量相当的重正化群方法相比, 精确度大为提高。 关键词：     

Synthesis and Raman analysis of 1D-ZnO nanostructure via vapor phase growth

1D-nanostructural zinc oxide (ZnO) with different shapes have been synthesized on p-type Si(1 0 0) and glass substrates via vapor phase growth by heating pure zinc powder at temperatures between 480 and 570 °C. The different ZnO nanostructures depend on the substrates and the growth temperatures. Scanning electron microscopy and X-ray diffraction revealed that a well-aligned nanowires array, which are vertical to the substrate of Si(1 0 0) with 18 sides on their heads, but six sides on their stems, has been formed at 480 °C. Raman study on the ZnO nanostructures shows that the coupling strength between electron and phonon determined by the ratio of the second- to the first-order Raman scattering cross-sections declines with decreasing diameter of the nanowires. However, a little changes of the coupling strength in terms of the width of the nanobelts have been observed.     

微球板电子倍增器基体制备技术研究

新型微球板电子倍增器和微通道板相比具有高增益、无离子反馈、制备简单、造价低廉等优点。介绍了微球板电子倍增器的工作原理、特点和广阔的应用前景。由于微球板基体的形成技术是微球板制备的关键技术，论文从理论上研究了微球板基体烧结过程中的烧结速率。并采用自行设计组分的高铅玻璃，用立式炉成珠设备进行了玻璃微珠的制备。探索了微球板制备过程中玻璃微珠的分级技术、微球板电子倍增器基体成型工艺和技术。制备出基本满足要求的微球板电子倍增器基体。给出了制造的样品和文献上样品结构的SEM对比照片，最后对实验过程中的一些现象进行了分析，并给出了实验的结论。     

Tunable narrow-band infrared emitters from hexagonal lattices

In this work, we present both the theoretical basis as well as supporting experimental measurements for development of a novel mid-infrared thermally stimulated narrow band emitter with a spectral bandwidth of less than 10%. To achieve this, we utilize a metallized-surface 2D photonic crystal of air voids in a silicon background with hexagonal structure symmetry. Our results are based on the generation of discrete surface plasmon (SP) modes in the thin metallized layer residing on the top surface. This yields a series of adequately spaced discrete peaks in the reflection spectrum, dominated by a single sharp feature corresponding to the lowest plasmon order, in an otherwise uniform highly reflective spectrum (>90%) over most of the IR spectrum. This, in turn, gives rise to a sharp absorption feature with a correspondingly narrow thermal emission peak in the emission spectrum. Transfer matrix calculations simulate well both the position and strengths of the absorption peaks. By altering the period of the surface photonic lattice, the SP peak and emissive band can be tuned to the desired wavelength. These devices promise a new class of tunable infrared emitters with high power in a narrow spectral bandwidth. Such narrow band sources are critical to achieving high efficiency gas sensors.